Skip to content

Stiebel Eltron Mini 3 -1 Single Handwashing Sink Electric Tankless Water Heater

SKU 220816
Original price $159.00 - Original price $159.00
Original price
$159.00 - $159.00
Current price $159.00
in stock

Rise takes a thoughtful approach to assessing and choosing home improvement products and brands that prioritize homeowners' health, wealth, and the planet.

The Stiebel Eltron Mini 3-1 tankless water heater is designed for installation at the point-of-use, or under the sink. 120V - 3kW Mechanical

The Mini heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini water heaters are equipped with a safety high limit with a manual reset.

Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. The Mini 2-1 is internally restricted to 0.32 GPM. The Mini 2-1, 2.5-1, and 3-1 models ship with a 0.5 GPM pressure compensating flow reducer/aerator. All aerators are designed to fit the most common faucets. No pressure relief valve, drains, or circulating pumps are needed.


  • Extremely compact design saves space. Only 7.5″ x 6.5″.
  • Major energy savings
  • Unlimited supply of hot water
  • Proven reliability
  • Can be mounted with fittings pointing up or down
  • Perfect for Bathroom sinks (Commercial, Residential)
  • Ideal energy/water-saving solution for Boats, RVs, small cabins where space is a premium and hot water is required
  • Sleek design is appealing and can be mounted in plain sight
  • Can be mounted with fittings pointing up or down
  • Pre-wired pigtail included

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
shipping emissions removed
That's like...
miles driven by an average gasoline-powered car
We fund innovations in...
Direct Air Capture
Bio Oil


Mechanical modelsMini™ 2-1 (231045)Mini™ 2.5-1(232098)Mini™ 3-1 (220816)Mini™ 3.5-1 (232099)Mini™ 4-2 (222039)Mini™ 6-2 (220817)
Thermostatic ModelsMini™-E 2-1 (236011) Mini™-E 2.5-1 (236135)Mini™-E 3-1 (236010)Mini™-E 3.5-1 (236136)Mini™-E 4-2 (236009)Mini™-E 6-2 (236008)
Phase - 50/60 Hz1
Voltage120 V120 V120 V120 V240 V or 208 V240 V or 208 V
Wattage1.8 kW2.4 kW3.0 kW3.5 kW3.5 kW2.6 kW5.7 kW4.3 kW
Amperage15 A20 A25 A29 A15 A13 A24 A21 A
Min. recommended circuit breaker size (1)15 A (SP)20 A (SP)25 A (SP)30 A (SP)15 A (DP)25 A (DP)
Min. recommended wire size (2)14/2 AWG12/2 AWG10/2 AWG 10/2 AWG14/2 AWG10/2 AWG
Minimum water flow to activate unit 
Mechanical Units0.21 gpm (0.8 l/min0.40 gpm (1.5 l/min)0.40 gpm (1.5 l/min)0.40 gpm (1.5 l/min)0.40 gpm (1.5 l/min)0.77 gpm (2.9 l/min)
Thermostatic Units0.21 gpm (0.8 l/min)0.30 gpm (1.15 l/min)0.30 gpm (1.15 l/min)0.30 gpm (1.15 l/min)0.30 gpm (1.15 l/min)0.48 gpm (1.8 l/min)
Water temp. range Electronic units are adjustable from 86–122°F (30–50 °C)
Energy Factor (EF) (Mechanical / Thermostatic)0.98 / 0.97 (UEF) 1.0 / 0.990.99 / 0.99 0.99 / 0.99 0.99 / 1.00.99 / 1.0
Weight3.44 lb (1.56 kg)
DimensionsWidth 7½" (19.0 cm) x Height 6½" (16.5 cm) x Depth 3¼" (8.2 cm)
Water volume in unit0.026 gal (0.1 l) 
Minimum pressure30 psi (2 bar)
Working pressure150 psi (10 bar)
Tested to pressure300 psi (20 bar)
Water connections (4)3 /8˝ O.D. flexible braided stainless steel hose connectors


Mini™ 2-1 is internally restricted to 0.32 gpm (1.2 l/min). Mini™-E 2-1 is internally restricted to 0.40 gpm (1.5 l/min).

 All Mini™ models ship with appropriately sized pressure compensating flow-reducer/aerators that must be installed. 

1 Nominal mains voltage is 110–120 V and 220–240 V. 

2 This is our recommendation for overcurrent protection sized at 100% of load. Check local codes for compliance if necessary. Tankless water heaters are considered a non-continuous load. 

3 Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load. 

4 Mechanical units suitable for supply with cold water only. Thermostatic units can accept inlet water of 122 °F.




Mini/MiniE Brochure and Sizing Guide

Specifications and Installation Guide

Use and care/Warranty Information

Crossover Guide

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.