AFM Safecoat Dynoseal Roof and Foundation Sealer

2

SKU 31163

by AFM Safecoat

$100.00 - $495.00

$100.00

$100.00 - $495.00

$100.00

Availability:

in stock

Availability:

in stock

Made in the USA

Water Resistant

Contains Zero HAP

Contains Low VOC Levels

AFM Safecoat® Dynoseal is a low-odor, all-weather, waterproof, vapor-proof coating, and sealer that remains flexible for years. It is highly resistant to flame spread and temperature change and, when cured, is also highly resistant to gasoline, oil, grease, fungi, acids, and alkalines.

Dynoseal is ideal for seamless roofs and as a deck coating and underlayment for shower stalls, pools, tubs, and saunas. It is also recommended for use in repairing roofs, flashing, shingles, and metal seams and as a vapor barrier against moisture from below-grade foundations.

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Learn more about our order processing & shipping times here.

Quantity

Specifications and Important Details

Use On	Seamless roofs and as a deck coating and underlayment for shower stalls, pools, tubs and saunas. It is also recommended for use in repairing roofs, flashing, shingles and metal seams, and as a vapor barrier against moisture from below-grade foundations.
Limitations	Safecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
Surface Preparation	Clean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application.
Application	Before using, stir Safecoat DynoSeal well, then apply as is. Apply with a brush or 3/8” roller. Roof and deck coating: 2 coats. Below grade application: 4 coats. Safecoat DynoSeal is not meant to be exposed to the elements for extended periods of time. It should be top-coated with an elastomeric roof coating such as Safecoat RoofGuard. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.
Clean-up	Clean tools and equipment while they are still wet with a warm soapy water solution.
Drying/Curing time	Re-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Temperatures should be expected to remain above 45 degrees F for two days to allow full curing. Surface remains tacky to touch after drying.
Health Precautions	As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
Physical Description	Low odor, mildly alkaline, black
% Volatile by Volume	50.18%
Solubility in Water	Dilutable
% Volatile by Weight	49.23%
VOC Material	19 g/l
VOC Material less H20	36 g/l
HAP’s (Hazardous Air Pollutants)	Zero

Documentation and Tear Sheets

Safecoat Dynoseal Installation

Safecoat Dynoseal MSDS

AFM Safecoat Dynoseal Roof and Foundation Sealer

Dive into more

Interested in Deals and New Products?