AFM Safecoat DynoFlex Textured Sealant

SKU 51173

by AFM Safecoat

$81.00 - $396.00

$81.00

$81.00 - $396.00

$81.00

Availability:

in stock

Availability:

in stock

Made in the USA

Water Resistant

Contains Zero HAP

Contains Low VOC Levels

AFM Safecoat® Dynoflex is a water-based, low-odor elastomer sealer that comes in a paste-like compound for sealing seams, joints and cracks in new and old heating and air conditioning ducts, and for repairing metal roofs and asphalt shingles. Also comes in a sprayable form that can be used over Safecoat® DynoSeal as a topcoat for roofs and decks. Highly resistant to harsh weather and temperature changes.

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Learn more about our order processing & shipping times here.

Quantity

Specifications

Use On	New and old heating and air conditioning ducts, metal roof cracks, damaged asphalt shingles, mobile home roofs and similar areas.
Limitations	Safecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
Surface Preparation	Clean surfaces of dirt, grease, mildew and oil. Old asphalt shingles should be power washed prior to treatment. Surface should be completely dry before application. Always spot test for adhesion over prior coatings.
Application	Apply with a trowel at 15 mils wet directly from the container without dilution. Two coats provide additional protection. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.
Clean-up	Clean tools and equipment while they are still wet with a warm soapy water solution.
Drying/Curing time	Re-coatable after 2 hours in normal conditions. Cures pliable in 24 hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F.
Health Precautions	As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
Coverage	One gallon of Safecoat DynoFlex covers approximately 100 square feet at 15 mils thickness.
Color	Light tan
Physical Description	Low odor, mildly alkaline, white
% Volatile by Volume	56.89%
Solubility in Water	Dilutable
% Volatile by Weight	44.91%
VOC Material	9g/l, 0.08 lb./gal
VOC Material less H20	22g/l,0.18 lb./gal
HAP’s (Hazardous Air Pollutants)	Zero

Documentation and Tear Sheets

Safecoat Dynoflex Installation

Safecoat Dynoflex MSDS

AFM Safecoat DynoFlex Textured Sealant

Dive into more

Interested in Deals and New Products?