• Neutral odor
• Seals and protects against water and chemicals
• Clear finish enhances wood grain without yellowing
• Can be applied over oil-based stain or finish
• 500-600 sq ft per gallon
• Dries quick up to three coats in a day
• Available in matte, satin or semi-gloss in quarts, gallons or five-gallon pails
• PolyWhey Floor Finish is a USDA Certified Biobased Product

If applying to previously finished wood, sand surface to remove old coatings before applying new finish. If sanding the entire surface is not desired, sand areas of distress that can cause flaking. This allows blending of edges.Vacuum dust and wipe with a water-dampened cloth.

Application

1. Stir well prior to use. Apply full strength with brush, floor pad or t-bar. Thinning may result in reduced performance.

2. Test the finish on a sample piece of wood to confirm compatibility and desired appearance. For best results apply in temps between 65F-80F with a relative humidity of 40%-60%. Avoid applying in direct sunlight Three coats are recommended for optimum product performance.

3. Apply thin, even coats taking care to prevent the finish from forming puddles. Overlap strokes and always maintain a wet edge. Finish will dry in two hours under normal conditions. High humidity or low temperature may lengthen dry time.

4. Sand lightly after first coat with very fine sandpaper (220 grit or finer).

5. Vacuum dust and wipe with a water-dampened cloth and Vermont Natural Coatings Wood Cleaner. Never use steel wool or a tack cloth.

6. Apply second coat.

7. After second coat sand only if 24 hours have passed since the previous coat was applied. Sanding, vacuuming and cleaning between coats will aid adhesion and create a smoother surface.

• 1. Stir well prior to use. Apply full strength with brush, floor pad or t-bar. Thinning may result in reduced performance.
• 2. Test the finish on a sample piece of wood to confirm compatibility and desired appearance. For best results apply in temps between 65F-80F with a relative humidity of 40%-60%. Avoid applying in direct sunlight Three coats are recommended for optimum product performance.
• 3. Apply thin, even coats taking care to prevent the finish from forming puddles. Overlap strokes and always maintain a wet edge. Finish will dry in two hours under normal conditions. High humidity or low temperature may lengthen dry time.
• 4. Sand lightly after first coat with very fine sandpaper (220 grit or finer).
• 5. Vacuum dust and wipe with a water-dampened cloth and Vermont Natural Coatings Wood Cleaner. Never use steel wool or a tack cloth.
• 6. Apply second coat.
• 7. After second coat sand only if 24 hours have passed since the previous coat was applied. Sanding, vacuuming and cleaning between coats will aid adhesion and create a smoother surface.

USDA Certified Biobased Product

PolyWhey Floor Finish Product Profile

PolyWhey Floor Finish Matte Safety Data Sheet

PolyWhey Floor Finish Satin Safety Data Sheet

PolyWhey Floor Finish Semi-gloss Safety Data Sheet

PolyWhey Floor Finish Maintenance

PolyWhey Finish - Floor or Furniture?