AFM Naturals Oil Wax Finish

1

SKU 40316

by AFM Safecoat

$115.00 - $570.00

$570.00

$115.00 - $570.00

$570.00

Availability:

in stock

Availability:

in stock

Earn 3 points for every $1 spent as a Rise Rewards Member

Are You a Pro?

Get exclusive Rise PRO™ pricing and benefits

Made in the USA

Plant-Based Building Material

Water Resistant

Contains Zero HAP

Contains Low VOC Levels

Biodegradable

Authorized Retailer

30-Day Happiness Guarantee

FREE Shipping Over $99

AFM Naturals™ Oil Wax Finish is an organic plant-based premium hardener and sealer for unfinished woods that works well on all ready-to-finish wood, bamboo, and cork floors, and other interior wooden surfaces, including children’s furniture and toys. It contains a sophisticated combination of natural resins and waxes that together create a durable, water-repellant, watermark-resistant finish and sealer, enhancing and maintaining wood beauty and breathability. Based on natural vegetable oils, waxes, and plant extractives, this product is free of lead, cobalt, and citrus-drying compounds.

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Learn more about our order processing & shipping times here.

Quantity

Specifications

Name: AFM Naturals Oil Wax Finish
Brand: AFM Safecoat
SKU: 40116
Price: 570.0 USD
Availability: InStock
Rating: 5.0 (1 reviews)

Use On	Unfinished interior wooden floors, furniture, cabinets and wood trim.
Limitations	Safecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
Surface Preparation	Sand wood smooth with 200 grit sandpaper to open wood grain. Surface should be completely dry before application.
Application	Before using, stir Safecoat Naturals Oil Wax Finish well, then apply as is stirring occasionally during use. Apply with a brush, roller, pad or sprayer. ALWAYS conduct several test patches or a test coat to ensure compatibility and acceptability of appearance before application to the entire surface. Although Safecoat Naturals Oil Wax finish contains no formaldehyde or other toxic ingredients and requires no special protective equipment to apply, assure good ventilation throughout use and while product is drying. Apply the first coat buffing or burnishing with a buffing pad or 250-350 aluminum oxide sandpaper and work it rigorously into and with the wood grain. Allow oil to penetrate for 10 - 15 minutes, then APPLY A SECOND COAT WHILE FIRST COAT IS STILL WET. Apply the second coat in the same manner as the first. Allow the second coat to penetrate for 10-15 minutes, then wipe off all oil that has not penetrated into the wood with a clean, absorbent cloth (see warning about spontaneous combustion). Do not allow oil to puddle. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface.
Clean-up	Clean tools and equipment while they are still wet with citrus solvent or odorless mineral spirits.
Drying/Curing time	Under normal conditions, allow 24 hours of dry time before putting the surface into service. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F.
Health Precautions	As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
Coverage	One gallon covers approximately 350 square feet
Physical Description	Mild oil odor, dries clear
VOC Material	250 g/l
HAP’s (Hazardous Air Pollutants)	Zero

Documentation

Oil Wax Finish Installation

Oil Wax Finish MSDS

AFM Naturals Oil Wax Finish

Dive into more

Interested in Deals and New Products?