Specifications

• Ultra-Low VOC (Less than 30g/L)
• Covers 300-400 sq. ft per gallon
• Extends the life of the topcoat
• Ready for topcoat after 12-48 hours
• Available in quarts, gallons and five gallon pails
• Easy application & water cleanup

• Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining.
• For previously stained wood, sand surface lightly to help adhesion.
• If coating unfinished softwood, we recommend using Suncare 900 as a pre-treatment.
• For all other unfinished woods, pre-treat with Hydro-Oil Primer.

1. Stir well prior to use.
2. Always test the finish on a sample piece of wood to confirm the desired appearance.
3. Apply with brush, paint pad, roller or spray.
4. One coat is recommended on all sides of wood.
5. Apply evenly with the grain and always maintain a wet edge. If rolling, follow with brush or paint pad.
6. For best results apply in temperatures between 45° – 80°F and relative humidity of 40%-60%

Do not apply when rain is expected within 24 hours.