Skip to content
AFM Safecoat WaterShield

AFM Safecoat WaterShield

4 Reviews
SKU 31109
by AFM Safecoat
$65.00 - $320.00
$65.00
$65.00 - $320.00
$65.00
Availability:
in stock
Availability:
in stock

Save 10% on select products with backtoschool at Checkout. Brand and product exclusions apply

Why Is This Product On Rise?

This clear, versatile, controlled-penetration, water-repelling sealer provides an invisible barrier against water, and resists oils, grease and similar liquids. It is fast drying, has excellent adhesion and is easy to apply. Also helps to harden, dust-proof and control efflorescence in masonry surfaces. May be used on painted surfaces and may be painted over when dry. Dries clear and does not discolor.

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.
Carbon-neutral shipping with Shopify Planet
Carbon neutral shipping on all orders
3,685kg
shipping emissions removed
That's like...
9,434
miles driven by an average gasoline-powered car
We fund innovations in...
Direct Air Capture
Bio Oil
Mineralization

Specifications

Use OnPorous concrete, stucco, brick, block, terrazzo and unglazed tile. Can also be used to add water repellency to exterior vertical wood siding when applied over Safecoat DuroTone.
Drying TimeRe-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F
Limitations

Safecoat paints are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze.

Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

Surface PreparationClean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application. Always spot test for adhesion over prior coatings.
Clean-upClean tools and equipment while they are still wet with a warm soapy water solution. 
Health PrecautionsAs with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation
Physical Data

Physical Description: Low odor, milky

% Volatile by Volume: 87.49%

Solubility in Water: Dilutable

% Volatile by Weight: 87.05%

VOC Material: 2 g/l

VOC Material less H20: 14 g/l

HAP’s (Hazardous Air Pollutants) zero

Application Notes

Before using, stir Safecoat Water Shield well, then apply as is. Apply with a brush, pad or airless sprayer. Spraying, reduce with up to 1/2 pint of water per gallon. Use a painter’s mask when spraying.

(Note: highpile heights will add additional texture.) Airless sprayers should have a 17/1000 to 21/1000 tip (reversible type is best). Only a 30 mesh high pressure filter should be used. Use a painter’s mask when spraying. For full coverage

application, overlap preceding application with 1/4 to 1/2 the fan width at a distance of 18” from surface.

Documentation and Tear Sheets

Spec Sheet

MSDS

Dive into more

Discover more about this product category, find related articles and more!

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.