AFM Safecoat EcoLacq Matte

SKU 57111-White

by AFM Safecoat

$94.00 - $108.00

$108.00

$94.00 - $108.00

$108.00

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Availability:

in stock

Safecoat EcoLacq is a pigmented, hard, and durable matte water-based replacement for high solvent-content lacquer. Its very low odor and VOC content have allowed it to be used even in the homes of the chemically sensitive. Safecoat® EcoLacq seals in outgassing from the substrate and has superior resistance to stains, marring, and fingerprint marks. It is ideal for cabinets, furniture, and woodwork.

Want to match a custom color? Contact Us.

Quantity

Specifications

Use On	Unfinished or previously finished wooden surfaces such as wood cabinetry and doors, paneling, furniture, and wood railings. Tintable in pastel and deep base colors
Limitations	Safecoat paints are made without formaldehyde preservatives. Do not contaminate. Do not use when indoor temperature is below 55 degrees F. Do not freeze.
Surface Preparation	Ideal painting conditions include: dry surface, fresh air flow, 30-70% relative humidity, 55° to 85° F. Clean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application.
Coverage	One gallon covers approximately 300-400 based on surface porosity
Application	Use thing coats. Stir well before use; then apply with brush, roller or airless sprayer. Always wear painters mask when spraying. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly. Spraying Instructions Reduce with up to 1/2 pint of water/gallon as needed. Airless sprayers should use 17/1000 to 21/1000 tip Reversible tips are best Use only 30 mesh high pressure filters For best coverage, spray 18" from surface Overlap preceding coat with 1/4 to 1/2 the fan width.
Drying/Curing Time	Can be recoated after 4 hours. For best results, wait at least 8 hours before recoating. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F
Cleanup	Clean tools and equipment while they are still wet with a warm soapy water solution. Any unused paint should be stored in air tight container for reuse. Or, add kitty litter to solidify in the can or roll out on a piece of cardboard and leave to dry before disposing. Do not flush excess paint down the sink or toilet.
Health Precautions	As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
Physical Description	Low odor, mildly alkaline
Solubility in Water	Dilutable
VOC Material	74 g/l
VOC Material less H20	182 g/l
HAP’s (Hazardous Air Pollutants)	Zero