Skip to content
AFM Safecoat EcoLacq Matte

AFM Safecoat EcoLacq Matte

SKU 57161-Angel Food Cake-0913
by AFM Safecoat
$94.00 - $108.00
$94.00
$94.00 - $108.00
$94.00
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock

Safecoat EcoLacq is a pigmented, hard, and durable matte water-based replacement for high solvent-content lacquer. Its very low odor and VOC content have allowed it to be used even in the homes of the chemically sensitive. Safecoat® EcoLacq seals in outgassing from the substrate and has superior resistance to stains, marring, and fingerprint marks. It is ideal for cabinets, furniture, and woodwork.

Want to match a custom color? Contact Us.

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Learn more about our order processing & shipping times here.
Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
6,765kg
shipping emissions removed
That's like...
17,318
miles driven by an average gasoline-powered car
We fund innovations in...
Direct Air Capture
Bio Oil
Mineralization

Specifications

Use OnUnfinished or previously finished wooden surfaces such as wood cabinetry and doors, paneling, furniture, and wood railings. Tintable in pastel and deep base colors
LimitationsSafecoat paints are made without formaldehyde preservatives. Do not contaminate. Do not use when indoor temperature is below 55 degrees F. Do not freeze.
Surface PreparationIdeal painting conditions include: dry surface, fresh air flow, 30-70% relative humidity, 55° to 85° F. Clean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application.
CoverageOne gallon covers approximately 300-400 based on surface porosity
Application

Use thing coats. Stir well before use; then apply with brush, roller or airless sprayer. Always wear painters mask when spraying. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

 

Spraying Instructions

  • Reduce with up to 1/2 pint of water/gallon as needed.
  • Airless sprayers should use 17/1000 to 21/1000 tip
  • Reversible tips are best
  • Use only 30 mesh high pressure filters
  • For best coverage, spray 18" from surface
  • Overlap preceding coat with 1/4 to 1/2 the fan width. 
Drying/Curing TimeCan be recoated after 4 hours. For best results, wait at least 8 hours before recoating. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F
CleanupClean tools and equipment while they are still wet with a warm soapy water solution. Any unused paint should be stored in air tight container for reuse. Or, add kitty litter to solidify in the can or roll out on a piece of cardboard and leave to dry before disposing. Do not flush excess paint down the sink or toilet.
Health PrecautionsAs with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. 
Physical DescriptionLow odor, mildly alkaline 
Solubility in WaterDilutable
VOC Material 74 g/l
VOC Material less H20182 g/l
HAP’s (Hazardous Air Pollutants)Zero

Downloads

Spec Sheet

MSDS

Dive into more

Discover more about this product category, find related articles and more!

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

Skip to content