Stiebel Eltron DHC-E 12/15 - 2 Trend Point-of-Use Electric Tankless Water Heater

Name: Stiebel Eltron DHC-E 12/15 - 2 Trend Point-of-Use Electric Tankless Water Heater
Brand: Stiebel Eltron
SKU: 200059
Price: 319.0 USD
Availability: InStock

SKU 200059

by Stiebel Eltron

$319.00 - $319.00

$319.00

$319.00 - $319.00

$319.00

Availability:

in stock

Save 10% with "fallfixup" Exclusions apply

Rise takes a thoughtful approach to assessing and choosing home improvement products and brands that prioritize homeowners' health, wealth, and the planet.

Helps Limit Water Usage

Helps You Save Money

Helps You Save Energy

Professional Installation Recommended

Authorized Retailer

30-Day Happiness Guarantee

Free Shipping

Stiebel Eltron DHC-E 12/15 - 2 Trend incorporates the new Direct Coil™ heating technology, Stiebel Eltron’s most advanced technology. 240/208V - 12.0/14.4 kW Direct coil tankless electric with internal thermostat.

The robust and trouble-free Direct Coil^™ heating system is self-cleaning for superior limescale resistance, with the added benefit of faster heat-up time, lower latent heat retention, and more.

DHC-E Trend models are equipped with a backlit digital display screen. Desired output temperature is easily set using the dial and display on the cover. Ideal for both residential and commercial point-of-use sink applications, these new Direct Coil^™ models heat water endlessly on demand at 99% efficiency.

Features:

Direct Coil^™ heating system’s proven and trouble-free technology self-cleans for increased limescale resistance
Switchable kW power output means each model can cover more applications
Backlit display shows the current temperature
Easily adjustable temperature (68-140 °F) via knob on front cover
Ideal for many commercial applications including bathrooms, break rooms, utility sinks, or a single low-flow shower
Heats water on demand, for endless a water as long as it is needed
Electronic self-modulation technology ensures the least amount of electricity needed is used
Sleek European design is considerably smaller than a tank, requires no venting, and allows space-saving installation close to the point-of-use
Direct Coil^™ heating system provides fast heat-up and response

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

Specifications

Model	DHC-E 3/3.5-1 Trend	DHC-E 4/6-2 Trend		DHC-E 8/10-2 Trend DHC-E 8/10-2 Plus		DHC-E 12/15-2 Trend DHC-E 12/15-2 Plus
Item no.	200057	200061		200058 (Trend) 202145 (Plus)		200059 (Trend) 200056 (Plus)
Phase - 50/60 Hz	1
Voltage	120 V	240 V	208 V	240 V	208 V	240 V	208 V
Wattage (1) , jumper position 1 [low] / 2 [high]	3 kW / 3.5 kW	3.8 kW / 6 kW	2.9 kW / 4.5 kW	7.2 kW / 9.6 kW	5.4 kW / 7.2 kW	12 kW / 14.4 kW	9 kW / 10.8 kW
Amperage, jumper position 1 [low] / 2 [high]	25 A / 29.2 A	15.8 A / 25 A	13.9 A / 21.7 A	30 A / 40 A	26 A / 34.6 A	50 A / 60 A	43.3 A / 52 A
Min. recommended circuit breaker size (2) , jumper position 1 [low] / 2 [high]	25 A / 30 A	20 A / 25 A	15 A / 25 A	30 A / 40 A	30 A / 35 A	50 A / 60 A	50 A / 60 A
Min. recommended AWG wire size (3) , jumper position 1 [low] / 2 [high	10/2 / 10/2	12/2 / 10/2	14/2 / 10/2	10/2 / 8/2	10/2 / 8/2	8/2 / 6/2	8/2 / 6/2
Minimum water flow to activate unit	0.264 gpm (1.0 l/min)
Weight	5.5 lb (2.5 kg)
Dimensions	Height 14 1/8" (360 mm) x Width 8" (202 mm) x Depth 4 5/16" (109 mm)
Nominal water volume	0.07 gal (0.277 l)
Max. permissible inlet temperature	149 °F (65 °C)
Maximum permissible pressure	145 psi (10 bar)
Water connections (3)	½" NPT

DHC-E 3/3.5-1 Trend and 4/6-2 Trend ship with pressure compensating flow-reducer/aerators that must be installed.

1 Factory default setting is jumper position 2 [high]

2 Overcurrent protection sized at 100% of load. Tankless water heaters are considered a non-continuous load. Use only GFCI Class A circuit breakers.

3 Copper conductors with a temperature rating of 75 °C or greater must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load.

These are recommendations. Check local codes for compliance if necessary