Skip to content

Vermont Natural Coatings DynaSeal Concrete & Masonry Sealer

SKU 101300
Original price $79.75 - Original price $357.50
Original price
$79.75
$79.75 - $357.50
Current price $79.75
Availability:
in stock
Availability:
in stock

Vermont Natural Coatings DynaSeal Concrete & Masonry Sealer is an innovative, eco-friendly solution to sealing concrete and masonry. Using cutting-edge nanotechnology, Dynaseal penetrates deep into substrates to create a flexible, breathable barrier that keeps moisture out while allowing it to escape. Say goodbye to the need for yearly reapplication, as this non-film-forming sealer provides long-lasting protection.

Dynaseal is an ultra-low VOC solution that primes, seals and protects against mold and mildew stains. It is resistant to salts and chlorides, making it ideal for green concrete applications. With approximately 200-300 sq. ft. per gallon coverage, Dynaseal is a cost-effective, safe, and non-toxic option for those who care about their health and the environment. Join Vermont Natural Coatings in creating a better future for people, pets, and the planet.

      Carbon-neutral shipping with Shopify Planet
      Carbon-neutral shipping on all orders
      6,282kg
      shipping emissions removed
      That's like...
      16,081
      miles driven by an average gasoline-powered car
      We fund innovations in...
      Direct Air Capture
      Bio Oil
      Mineralization

      More about this product

      Color in ContainerMilky White
      Clarity (Dry)Crystal Clear
      Chemical ResistanceNo visual defects
      VOCCoating: ≤2 g/L
      SolventWater
      Flash PointNone
      Freeze/Thaw StabilityStable after 3 cycles - Keep from freezing
      Pot Life12 -18 months from date of manufacture
      Dry Time1-2 hours under normal conditions
      Clean UpSoap and hot water
      OdorSlight odor
      Maximum CureOne week
      Coverage200-300 sq. ft. per gallon

      Surface Preparation & Installation Notes

      Surface PreparationSurface should be free of dust, dirt, contaminants, oil, grease or additives. Clean surfaces thoroughly with Vermont Natural Coatings Multi-Surface Cleaner before applying Dynaseal Concrete & Masonry Sealer. Can be used as a primer for Vermont Natural Coatings PolyRock Concrete Coating.  Can be painted over when dry to touch. 
      Installation Notes
      • Stir or shake well prior to use.
      • Always test Finish on a discrete area to confirm desired appearance. For best results apply when relative humidity is between 40% to 60%. Do not apply if temperature is below 35˚F/1.67˚C.
      • Apply with a brush, painters pad, pump-up garden sprayer, air-assisted and/or airless sprayer. Use 17 to 19 tip and medium to coarse spray pattern. Brush out any puddles.
      • Apply one coat. If applying two coats or when using tints and two coats are required, apply second coat when first coat is still damp. Do not sand between coats. On very porous concrete or masonry an additional coat may be necessary.
      • Under normal conditions treated concrete will be dry and ready for foot traffic in 2-3 hours.

      Documentation and Tear Sheets

      Interested in Deals and New Products?

      Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

      Skip to content