Skip to content

Vermont Natural Coatings DynaSeal Multi-Surface Sealer Concentrate

SKU 101302
Original price $138.40 - Original price $138.40
Original price
$138.40
$138.40 - $138.40
Current price $138.40
Availability:
in stock

Vermont Natural Coatings DynaSeal Multi-Surface Sealer Concentrate is an innovative solution for a world where safety and sustainability matter. Most sealants wear away quickly, leaving surfaces exposed and requiring frequent reapplication. Dynaseal uses advanced nanotechnology to penetrate deep into substrates, forming a breathable, flexible barrier that becomes part of the cellular structure. This creates long-lasting protection against water damage while allowing moisture to escape.

Dynaseal Multi-Surface Sealer is perfect for green concrete, and its superior resistance to salts, chlorides, mold, and mildew makes it an excellent choice for a wide range of surfaces. It is also eco-friendly, non-toxic, and ultra-low VOC, making it safe for people, pets, and the planet. It primes and seals the surface with just one coat, providing exceptional protection against airborne black mold, mold, and mildew stains.

With coverage of approximately 200-300 sq. ft. per gallon of prepared Dynaseal (one part Dynaseal mixed with one part water), it offers a cost-effective and efficient solution for both residential and commercial applications.

        Carbon-neutral shipping with Shopify Planet
        Carbon-neutral shipping on all orders
        6,275kg
        shipping emissions removed
        That's like...
        16,064
        miles driven by an average gasoline-powered car
        We fund innovations in...
        Direct Air Capture
        Bio Oil
        Mineralization

        More about this product

        Dynaseal Multi-Surface Sealer is a highly effective, multipurpose sealant to waterproof and protect all types of wood, concrete, and masonry surfaces. Revolutionary new nanoparticle technology creates a flexible non-film forming breathable barrier that penetrates below the surface to protect from water damage and decay.

        Surface Preparation

        Surface should be free of dust, dirt, contaminants, oil, grease or additives. Clean surfaces thoroughly with Vermont Natural Coatings Multi-Surface Cleaner before applying Dynaseal Multi-Surface Sealer. Can be used as a primer for Vermont Natural Coatings PolyRock Concrete Coating. Can be painted over when dry to touch. 

        Installation Notes

        • Dynaseal Multi-Surface Sealer Concentrate is designed to be diluted with clean water for each part of Concentrate as follows: mix one part water to one part Concentrate. Blend 10 minutes with electrical mixer.
        • Always test finish on a discrete area to confirm desired appearance. For best results apply when relative humidity is between 40% to 60%. Do not apply if temperature is below 35˚F/1.67˚C.
        • Apply with a brush, painters pad, pump-up garden sprayer, air-assisted and/or airless sprayer. Use 17 to 19 tip and medium to coarse spray pattern. Brush out any puddles. 
        • Apply one coat. If applying two coats or when using tints and two coats are required, apply second coat when first coat is still damp. Do not sand between coats. On very porous concrete or masonry an additional coat may be necessary.
        • Under normal conditions treated wood will be dry and ready for foot traffic in 2-3 hours. 

        Documentation and Tear Sheets

        Interested in Deals and New Products?

        Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

        Skip to content