Skip to content
Dig into 🛠️ renovation season with handpicked products and 🌱 carbon neutral shipping on every order!
Dig into 🛠️ renovation season with handpicked products and 🌱 carbon neutral shipping on every order!
AFM Safecoat Metalcoat Primer

AFM Safecoat Metalcoat Primer

SKU 80220
by AFM Safecoat
$26.00 - $410.00
$26.00
$26.00 - $410.00
$26.00
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Getting ready for 🛠️ reno season? Save 10% on select products with spring10 at Checkout. Brand and product exclusions apply

New to Rise? Get to know us.

Why Is This Product On Rise?

Safecoat® Metalcoat Interior and Exterior Primer is a thermoplastic acrylic emulsion primer that is fortified with rust-inhibiting pigments and designed for use on non-ferrous metal, iron, steel, aluminum, galvanized and masonry (not recommended for copper).

This primer provides a tough, flexible film for outstanding corrosion resistance and excellent adhesion.

What's Included

  • Available in Quart, Gallon, and 5 Gallon sizes

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

Specifications and Important Details

One gallon covers approximately 300-400 sqft based on surface porosity.

 

Drying/Curing Time

For best results wait a minimum of 4 hours before recoating. This product cures and bonds over a full 7 day period.

 

Cleanup

Clean tools and equipment while they are still wet with a warm soapy water solution. Any unused primer should be stored in air tight container for reuse. Or, add kitty litter to solidify in the can or roll out on a piece of cardboard and leave to dry before disposing. Do not flush excess primer down the sink or toilet.

 

Health Precautions

As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation.

Installation Notes

Surface Prep

Ideal priming conditions include: dry surface, fresh air flow, 30-70% relative humidity, 55° to 85° F. Clean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application.

 

Application

Stir well before use; then apply with brush, roller or airless sprayer. Always wear painters mask when spraying. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly. Spraying Instructions: 

  • Reduce with up to 1/2 pint of water/gallon as needed.
  • Airless sprayers should use 17/1000 to 21/1000 tip 
  • Reversible tips are best 
  • Use only 30 mesh high pressure filters 
  • For best coverage, spray 18" from surface 
  • Overlap preceding coat with 1/4 to 1/2 the fan width

Documentation and Tear Sheets

AFM Safecoat Metalcoat Primer MSDS

 

AFM Safecoat Metalcoat Primer Installation 

Dive into more

Discover more about this product category, find related articles and more!

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.