Vermont Natural Coatings and Böhme's Exterior Aging Stain is a premium wood treatment designed to provide an instant aged appearance while protecting and stabilizing the wood structure. This high-quality stain is perfect for use on new or bare exterior wood, providing a natural looking aged gray finish that evens out differences in wood tone.
With ultra-low VOC levels (less than 30g/L), this stain is environmentally friendly and safe to use. Each gallon can cover between 300-400 sq. ft. and is ready for a second coat after just 6-8 hours. This versatile stain does not require a topcoat, saving you both time and effort.
The easy application and water cleanup make it a breeze to use, with available sizes in quarts, gallons, and five-gallon pails. Get the beautiful, natural aged finish you want for your exterior wood surfaces with Vermont Natural Coatings and Böhme's Exterior Aging Stain.
Order Processing and Shipping
Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.
Installation Notes
Product Details
Ultra-Low VOC (Less than 30g/L)
Covers 300-400 sq. ft. per gallon
Ready for second coat after 6-8 hours
Does not require topcoat
Available in quarts, gallons and five gallon pails
Easy application & water cleanup
Surface Prep
Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining. For previously stained wood, sand surface lightly to help adhesion. If coating unfinished softwood, we recommend using Suncare 900 as a pre-treatment. For all other unfinished woods, pre-treat with Hydro-Oil Primer.
Application
Apply when no rain is expected for 24 hours. For pressure treated wood allow 3-6 months before application. Not suitable for subterranean or submerged wood.
Stir well prior to use.
Always test the finish on a sample piece of wood to con rm the desired appearance.
Apply with brush, paint pad, roller or spray.
Two coats are recommended on all sides of wood.
Apply evenly with the grain and always maintain a wet edge. If rolling, follow with brush or paint pad.
For best results apply in temperatures between 45°-80°F and relative humidity of 40%-60%. Do not apply when rain is expected within 24 hours.
Product will be ready for second coat after 4-6 hours; pre-treated wood will be ready after 12- 24 hours. One gallon will cover approximately 300-400 sq. ft. depending on porosity of wood.
