Skip to content
No Mow May 🐝 Save 15% with code May15 at checkout! With each purchase, Rise will plant 3 trees to help reforest the planet.
No Mow May 🐝 Save 15% with code May15 at checkout! With each purchase, Rise will plant 3 trees to help reforest the planet.

Stiebel Eltron DHC 10-2 Single Sink Point-of-Use Electric Tankless Water Heaters

SKU 074056
Original price $179.00 - Original price $179.00
Original price
$179.00
$179.00 - $179.00
Current price $179.00
No Mow May 🐝 Save 15% with code May15 at Checkout. Some restrictions apply

Stiebel Eltron DHC 10-2 tankless water heaters are designed for installation at the point of use. 240V/208V - 9.6 kW copper tankless electric 

The DHC heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

The heating element is controlled by a flow switch which means a DHC can never dry-fire and fail prematurely. And since all DHCs are hydraulically controlled, the operation is quiet. DHC water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

Features:

  •  Up to 50% less power consumption compared to storage type heaters
  •  Hot water instantly
  •  Hydraulically controlled for quiet operation
  •  Resettable safety high limit switch
  •  Lower installation costs compared to tank-type units
  •  Exclusive copper-clad heating element
  •  Never dry fires and fails prematurely
  •  Superior reliability

Every Rise order is shipped carbon neutral

With every Rise order, three trees will be planted to help restore areas devastated by wildfires in North America and restore the coastal mangrove population in Indonesia. Rise has committed to planting 40,000 trees in twelve months for 2022.

Interested in a large or custom order? Let's Talk!

Specifications

modelDHC 10-2
Item no. 074056 
Phase - 50/60 Hz1
Voltage240 V208 V
Wattage9.6 kW7.2 kW
Amperage40 A35 A
Min. recommended circuit breaker size (1)40 A35 A
Min. recommended wire size (2)8/2 AWG
Minimum water flow to activate unit0.79 gpm (3.0 l/min)
Weight5.3 lb (2.4 kg)
DimensionsWidth 7 7/8" (20.0 cm) x Height 14 3/16" (36.0 cm) x Depth 4 1/8" (10.4 cm)
Nominal water volume0.13 gal (0.5 l)
Working pressure150 psi (10 bar)
Tested to pressure300 psi (20 bar)
Water connections (3)½" NPT

DHC 3-1, 3-2, 4-2 ship with a 0.5 gpm (1.9 l/min) pressure compensating flow-reducer/aerator that must be installed. 

1 This is our recommendation for overcurrent protection sized at 100% of load (DP for 240/208/277 V & SP for 120 V models). Check local codes for compliance if necessary. Tankless water heaters are considered a non-continuous load.

2 Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load. 

3 Suitable for supply with cold water only

DHC Classic Brochure and Sizing Guide

Specifications and Installation Guide

Use and care/Warranty Information

Crossover Guide

Videos

 

 

 

Peace of mind for when you're ready to buy

Rise works for you, the homeowner and home professional - by researching the true benefits of home improvement products and materials. You can feel confident that the products you purchase on Rise come from manufacturers that have been vetted to ensure they benefit your health, wealth, and planet.

Learn more about our third-party reviewed criteria here