Skip to content
AFM Safecoat EcoLacq Matte White

AFM Safecoat EcoLacq Matte White

SKU 57111
by AFM Safecoat
$108.00 - $108.00
$108.00
$108.00 - $108.00
$108.00
Availability:
in stock

Save 10% on select products with backtoschool at Checkout. Brand and product exclusions apply

Why Is This Product On Rise?

Safecoat EcoLacq is a pigmented, hard, and durable matte water-based replacement for high solvent content lacquer. Its very low odor and VOC content allow it to be used even in the homes of the chemically sensitive. Safecoat® EcoLacq seals in outgassing from the substrate and has superior resistance to stains, marring, and fingerprint marks. It is ideal for cabinets, furniture, and woodwork.

  • Size: Gallon
  • Color: White

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

Carbon-neutral shipping with Shopify Planet
Carbon neutral shipping on all orders
3,683kg
shipping emissions removed
That's like...
9,430
miles driven by an average gasoline-powered car
We fund innovations in...
Direct Air Capture
Bio Oil
Mineralization

Product Information

Use On

Unfinished or previously finished wooden surfaces such

as wood cabinetry and doors, paneling, furniture, and

wood railings. Tintable in pastel and deep base colors

Limitations

Safecoat paints are made without formaldehyde

preservatives. Do not contaminate. Do not use when

indoor temperature is below 55 degrees F.

Do not freeze.

Drying/Curing Time

Can be recoated after 4 hours. For best results, wait

at least 8 hours before recoating. Normal conditions

include a dry surface, access to fresh air flow,

moderate humidity, and temperatures above 55

degrees F

Surface PreparationIdeal painting conditions include: dry surface, fresh air flow, 30-70% relative humidity, 55° to 85° F. Clean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application.
Coverage

One gallon covers approximately 300-400 based on

surface porosity

ApplicationUse thing coats. Stir well before use; then apply with brush, roller or airless sprayer. Always wear painters mask when spraying. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly. 
Cleanup

Clean tools and equipment while they are still

wet with a warm soapy water solution. Any unused paint should be stored in air tight container for

reuse. Or, add kitty litter to solidify in the can or roll

out on a piece of cardboard and leave to dry before

disposing. Do not flush excess paint down the sink

or toilet.

Health Precautions

As with all coatings and sealers, keep container

tightly closed and out of the reach of children. Do not

take internally. Keep from freezing. Always use adequate ventilation. 

Downloads

Spec Sheet

MSDS

Dive into more

Discover more about this product category, find related articles and more!

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.