Skip to content
Getting ready for 🛠️ reno season? Save 10% on select products at checkout* with "ready10"
Getting ready for 🛠️ reno season? Save 10% on select products at checkout* with "ready10"
AFM Safecoat Roofguard Roof Coating

AFM Safecoat Roofguard Roof Coating

SKU 51115
by AFM Safecoat
$85.00 - $420.00
$85.00
$85.00 - $420.00
$85.00
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Getting ready for 🛠️ reno season? Save 10% on select products with ready10 at Checkout. Brand and product exclusions apply

New to Rise? Get to know us.

Why Is This Product On Rise?

 AFM Safecoat® Roofguard Roof Coating is a water-based, low-odor roof coating that is ideal for properly primed roofs. It is mildew and water-resistant and resists weather elements. It has excellent bridging quality and can be used to patch, waterproof, seal and bridge hairline cracks.

What's Included

  • Available in Gallon and 5 Gallon (5 Gallon size is special order only)

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

Specifications and Important Details

Clean-up

Clean tools and equipment while they are still wet with a warm soapy water solution.

 

Drying/Curing time

Re-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Temperature should remain above 55 degrees F during first 12 hours of coating cure cycle.

 

Health Precautions

As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.

Installation Notes

Coverage: 100 square feet per gallon. Rougher or more porous surfaces may require more material. 15 mils dry film thickness is recommended for best protection. Maximum protection can be achieved with use in a roof system when applied with Safecoat DynoSeal for a total dry film thickness of 30 mils.

 

Surface Prep

Clean surfaces of dirt, grease, mildew and oil. Existing coatings must be tight and water resistant before applying Safecoat RoofGuard over the top. Existing coatings may let go from surface when top-coated with elastomeric coatings if they have weak bond and/or have a tendency to be wet. Check before application. Patch surface defects with appropriate material and prime before top-coating. One or more coats of Safecoat DynoSeal makes an excellent primer before application of RoofGuard. Use Safecoat DynoFlex Textured Natural on cracks and allow patch to dry before applying topcoat.

 

Application

  • Before using, stir Safecoat Roofguard well, then apply as is. 
  • Apply with a roller or airless sprayer. Two coats are recommended. Adequate film thickness determines the life and protection of the coating.

 

Documentation and Tear Sheets

Safecoat Roofguard Product Sheet

 

Safecoat Roofguard MSDS

Dive into more

Discover more about this product category, find related articles, videos, photos, rebates and more!

Product Research

Articles and Videos

Photos with Exterior Wood Sealant

Applicable Rebates

Check to see if rebates or incentives in your area apply to save even more on this product

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.