Skip to content

AFM Safecoat Mexeseal

2 Reviews
SKU 31187
Original price $75.00 - Original price $373.00
Original price
$75.00
$75.00 - $373.00
Current price $75.00
Availability:
in stock
Availability:
in stock
Availability:
in stock
Availability:
in stock

Safecoat Mexeseal is a low-odor, water-based semi-gloss or satin clear sealer that works on porous interior tile or masonry surfaces where oil and water repellency are desired. It is ideal for long-term protection against food, oil, and water stains on residential or commercial floors. It is a total replacement for high solvent content systems. Non-hazardous and non-flammable.

      Order Processing and Shipping

      Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Learn more about our order processing & shipping times here.

      Carbon-neutral shipping with Shopify Planet
      Carbon-neutral shipping on all orders
      6,828kg
      shipping emissions removed
      That's like...
      17,478
      miles driven by an average gasoline-powered car
      We fund innovations in...
      Direct Air Capture
      Bio Oil
      Mineralization

      Specifications

      USE ONUnpolished marble, limestone, granite, sandstone, slate, brick, terra cotta, concrete (brick, tile, precast panels, cast in place).
      LIMITATIONSSafecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will  cause Safecoat to dry and cure more slowly.
      SURFACE PREPARATION

      Clean surfaces of dirt, grease, mildew and oil.

       

      New cementitious surfaces should age at least thirty days and have a pH below 10 before coating. Scrub surface with an acid neutralizing cleaner. Triple rinse to assure cleaner is completely removed. Acid-etching may be required, followed by completely neutralizing the surface. Use extreme caution when working with acid and follow label and MSDS precautions. All acid residual must be removed prior to coating. Surface pH should be 7-10 for best results. Test surface porosity and profile by dropping water  nto dry surface. If water drops fail to penetrate quickly, surface may need additional attention to create proper surface profile.

      APPLICATION

      Before using, stir Safecoat MexeSeal well, then apply as is. APPLY THIN COATS with a brush, pad or airless sprayer.

       

      Use a painter’s mask when spraying. Airless sprayers should have a 17/1000 to 21/1000 tip (reversible type is best). Only a 30 mesh high pressure filter should be used. Use a painter’s mask when spraying. For full coverage application, overlap preceding application with 1/4 to 1/2 the fan width at a distance of 18” from surface.

      CLEAN-UPClean tools and equipment while they are still wet with a warm soapy water solution.
      DRYING/CURING TIMERe-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F
      HEALTH PRECAUTIONSAs with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation
      Physical DescriptionLow odor, clear
      % Volatile by Volume81.10%
      Solubility in WaterDilutable
      % Volatile by Weight79.40%
      VOC Material21 g/l
      VOC Material less H2099 g/l
      HAP’s (Hazardous Air Pollutants)Zero

      Documentation and Tear Sheets

      Interested in Deals and New Products?

      Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

      Skip to content