Skip to content

AFM Naturals Clear Penetrating Oil

SKU 40250
Original price $39.00 - Original price $530.00
Original price
$39.00
$39.00 - $530.00
Current price $39.00
Availability:
in stock
Availability:
in stock
Availability:
in stock

AFM Naturals™ Clear Penetrating Oil is an organic plant-based premium penetrating oil for new and old unfinished wood. It is excellent on wood fencing, timberwork, furniture, decking, paneling, and trim. It rejuvenates, weatherproof, and enhances the innate beauty of wood surfaces. Reduces peeling, blistering, and cracking. Unlike products used for similar purposes, it’s benzene-free. Non-flammable.

    Carbon-neutral shipping with Shopify Planet
    Carbon-neutral shipping on all orders
    6,282kg
    shipping emissions removed
    That's like...
    16,081
    miles driven by an average gasoline-powered car
    We fund innovations in...
    Direct Air Capture
    Bio Oil
    Mineralization

    Specifications

    Use On

    Wood fencing, timberwork, furniture, decking,

    and facia boards.

    LimitationsSafecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
    Surface PreparationClean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application.
    Application

    Before using, stir Safecoat Naturals Clear Penetrating well, then apply as is stirring occasionally during use. Apply with a brush, pad, roller or sprayer.

     

    ALWAYS conduct several test patches or a test coat to ensure compatibility and acceptability of appearance before application to the entire surface. Although Safecoat Naturals Penetrating Oil contains no formaldehyde or other toxic ingredients and requires no special protective equipment to apply, assure good ventilation throughout use and while product is drying. Protect adjacent surfaces not to be coated, including plants. Apply one even coat, working with the grain, using a premium quality, wide bristle brush, a roller (followed immediately by back brushing), or an airless sprayer with a 0.11 or larger tip and 700 - 800 psi (lowest pressure to achieve a full wet spray without atomization). Allow finish to penetrate for 10 - 15 minutes, then APPLY A SECOND COAT WHILE FIRST COAT IS STILL WET. Allow the second coat to penetrate for 10-15 minutes, then wipe off all oil that has not penetrated into the wood with a clean, absorbent cloth (see warning about spontaneous combustion elsewhere on this data sheet). Do not allow oil to puddle. If desired and wood is still absorptive, another coat may be applied after 24 hours, but note that additional coats will inhibit the ability to absorb stains or hard surface sealers. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface.

    Clean-upClean tools and equipment while they are still wet with odorless mineral spirits.
    Drying/Curing TimeUnder normal conditions (70 degrees F and 50% humidity) and with good ventilation, wood treated will be dry and ready for use in 24-48 hours. Allow two to three weeks for full product cure
    Health PrecautionsAs with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
    Physical DescriptionMiild oil odor, dries clear 
    % Volatile by Volume24.57%
    Solubility in WaterSlight
    % Volatile by Weight22.10%
    VOC Material200 g/l
    HAP’s (Hazardous Air Pollutants)Zero

    Downloads

    Interested in Deals and New Products?

    Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

    Skip to content