Skip to content
Welcome! Our store is brand new, so bear with us as we add new products and categories daily to bring you the best in sustainable home improvement!
Welcome! Our store is brand new, so bear with us as we add new products and categories daily to bring you the best in sustainable home improvement!

AFM Naturals® Clear Penetrating Oil

Original price $35.00 - Original price $470.00
Original price
$35.00 - $470.00
Current price $35.00
Plant-Based Building Material
Water Resistant
Contains Zero HAP
Contains Low VOC Levels
Made in the USA

AFM Naturals™ Clear Penetrating Oil is an organic plant-based finish that is free of VOCs, HAPs, solvents, preservatives, dryers, or irritants. Ideal use with timberwork, furniture, fencing, paneling, and trim. It weatherproofs the wood it protects and helps reduce peeling and cracking. 

What's Included

  • This product is sold by the quart, gallon, or five gallon
  • Benzene-free, and non-flammable 

Every Rise order is shipped carbon neutral.

On top of our commitment to 1% For the Planet, Rise also guarantees Carbon Neutral Shipping on all of its orders, regardless of size or destination.

Interested in a large or custom order? Let's talk!

Specifications and Important Details


Clean tools and equipment while they are still wet with odorless mineral spirits.


Drying/Curing time

Under normal conditions (70 degrees F and 50% humidity) and with good ventilation, wood treated will be dry and ready for use in 24-48 hours. Allow two to three weeks for full product cure. 


Health Precautions

As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.

Installation Notes

Before using, stir Safecoat Naturals Clear Penetrating Oil well, then apply as is stirring occasionally during use. Apply with a brush, pad, roller or sprayer. ALWAYS conduct several test patches or a test coat to ensure compatibility and acceptability of appearance before application to the entire surface. Although Safecoat Naturals Penetrating Oil contains no formaldehyde or other toxic ingredients and requires no special protective equipment to apply, assure good ventilation throughout use and while product is drying.


Apply one even coat, working with the grain, using a premium quality, wide bristle brush, a roller (followed immediately by back brushing), or an airless sprayer with a 0.11 or larger tip and 700 - 800 psi (lowest pressure to achieve a full wet spray without atomization). Allow finish to penetrate for 10 - 15 minutes, then APPLY A SECOND COAT WHILE FIRST COAT IS STILL WET. Allow the second coat to penetrate for 10-15 minutes, then wipe off all oil that has not penetrated into the wood with a clean, absorbent cloth (see warning about . spontaneous combustion elsewhere on this data sheet). Do not allow oil to puddle. If desired and wood is still absorptive, another coat may be applied after 24 hours, but note that additional coats will inhibit the ability to absorb stains or hard surface sealers. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine what preparation and techniques are best suited to the specific surface.

Documentation and Tear Sheets

Peace of mind for when you're ready to buy

Rise works for you, the homeowner - by researching the true benefits of home improvement products and materials. You can feel confident that the products you purchase on Rise come from manufacturers that have been vetted to ensure they benefit your health, wealth, and planet.

Learn more about our third-party reviewed criteria here