AFM Acrylacq Hard Clear Finish - Satin

Name: AFM Acrylacq Hard Clear Finish - Satin
Brand: AFM Safecoat
SKU: 51281
Price: 40.0 USD
Availability: InStock
Rating: 5 (1 reviews)

1

SKU 51281

by AFM Safecoat

$40.00 - $545.00

$40.00

$40.00 - $545.00

$40.00

Availability:

in stock, ready to be shipped

Availability:

in stock, ready to be shipped

Availability:

in stock, ready to be shipped

Getting ready for 🛠️ reno season? Save 10% on select products with spring10 at Checkout. Brand and product exclusions apply

New to Rise? Get to know us.

Why Is This Product On Rise?

Plant-Based

Water Resistant

Contains Zero HAP

Contains Low VOC Levels

Biodegradable

Made in the USA

Free Shipping

This clear, satin, water-based replacement for high solvent content lacquer is hard and durable, with superior resistance to stains, marring, and fingerprint marks.

What's Included

This product is sold by the quart, gallon, or five gallon

Order Processing and Shipping

Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

Quantity

Specifications and Important Details

Use on	Raw wooden stained or previously painted cabinetry, doors, paneling, furniture, and wood railings. When specifying matte finishes the best surface clarity is achieved by starting with gloss coats and using the lower sheen as the final coat. For optimum protection and to block VOC emissions, three coats is recommended. For a tinted version use Safecoat Ecolacq.
Limitations	Safecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly
surface Preparation	Clean surfaces of dirt, grease, mildew and oil. Apply test patches before undertaking large areas to assure good adhesion and lack of surface contamination. Wood staining should be completed before applying finish coats. Previously oil stained wood should be cured 14-20 days before Acrylacq application.
Application	Before using, roll the Safecoat Acrylacq container well, then apply as is. Stir product thoroughly every 20 minutes during application. Apply thinly with a brush, pad or airless sprayer.
Drying/Curing Time	Sandable after 2 - 4 hours, and re-coatable after 4 - 8 hours. The product will continue to cure and become harder over time. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F.
Health Precautions	As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
Physical Description	Milky dries clear
% Volatile by Volume	68.31%
Solubility in Water	Dilutable
% Volatile by Weight	67.01%
VOC Material	124 g/l
VOC Material less H20	281 g/
HAP’s (Hazardous Air Pollutants)	Zero

Documentation and Tear Sheets

Spec Sheet and Application

MSDS (Matte and Satin)

AFM Acrylacq Hard Clear Finish - Satin

Why Is This Product On Rise?

What's Included

Dive into more

Interested in Deals and New Products?