Skip to content

AFM Safecoat Roof Guard Roof Coating

SKU 51115
Original price $85.00 - Original price $420.00
Original price
$85.00
$85.00 - $420.00
Current price $85.00
Availability:
in stock
Availability:
in stock

AFM Safecoat Roof Guard Roof Coating is a water-based, low-odor roof coating that is ideal for properly primed roofs. It is mildew and water-resistant and resists weather elements. It has excellent bridging quality and can be used to patch, seal, and bridge hairline cracks. This product has excellent elongation and waterproofing qualities when applied at proper film thickness.

    Carbon-neutral shipping with Shopify Planet
    Carbon-neutral shipping on all orders
    6,275kg
    shipping emissions removed
    That's like...
    16,064
    miles driven by an average gasoline-powered car
    We fund innovations in...
    Direct Air Capture
    Bio Oil
    Mineralization

    Specifications

    Use OnProperly primed roofs made of synthetic plastic rubber, metal, concrete or clay tile.
    LimitationsSafecoat paints are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when temperatures are below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
    Surface Preparationate material and prime before top-coating. One or more coats of Safecoat DynoSeal makes an excellent primer before application of RoofGuard. Use Safecoat DynoFlex Textured Natural on cracks and allow patch to dry before applying topcoat.
    ApplicationBefore using, stir Safecoat Roofguard well, then apply as is. Apply with a roller or airless sprayer. Two coats are recommended. Adequate film thickness determines the life and protection of the coating. 
    Coverage100 square feet per gallon. Rougher or more porous surfaces may require more material. 15 mils dry film thickness is  recommended for best protection. Maximum protection can be achieved with use in a roof system when applied with Safecoat DynoSeal for a total dry film thickness of 30 mils. 
    Clean-upClean tools and equipment while they are still wet with a warm soapy water solution.
    Drying/Curing TimeRe-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Temperature should remain above 55 degrees F during first 12 hours of coating cure cycle.
    Health PrecautionsAs with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation.
    Physical DescriptionLow odor, mildly alkaline, white
    % Volatile by Volume57.62% 
    Solubility in Water Dilutable 
    % Volatile by Weight43.97%
    VOC Material35 g/l
    VOC Material less H2076 g/l 
    HAP’s (Hazardous Air Pollutants)Zero

    Documentation and Tear Sheets

    Interested in Deals and New Products?

    Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

    Skip to content