Skip to content

AFM Safecoat Metalcoat Primer

SKU 80220
Original price $26.00 - Original price $410.00
Original price
$26.00
$26.00 - $410.00
Current price $26.00
Availability:
in stock
Availability:
in stock
Availability:
in stock

AFM Safecoat Metalcoat Primer is a thermoplastic acrylic emulsion primer is fortified with rust-inhibiting pigments and designed for use on metal, iron, steel, aluminum, galvanized and masonry (not recommended for copper). It provides a tough, flexible film for outstanding corrosion resistance and excellent adhesion.

    Carbon-neutral shipping with Shopify Planet
    Carbon-neutral shipping on all orders
    6,275kg
    shipping emissions removed
    That's like...
    16,064
    miles driven by an average gasoline-powered car
    We fund innovations in...
    Direct Air Capture
    Bio Oil
    Mineralization

    Specifications

    Use OnInterior and exterior metal surfaces steel, galvanized metal and aluminum.
    LimitationsSafecoat primers are made without formaldehyde preservatives. Do not contaminate. Do not use when indoor temperature is below 55 degrees F. Do not freeze.
    Surface PreparationIdeal priming conditions include: dry surface, fresh air flow, 30-70% relative humidity, 55° to 85° F. Clean surfaces of dirt, grease, mildew and oil. Surface should be completely dry before application. 
    CoverageOne gallon covers approximately 300-400 based on surface porosity
    Application

    Stir well before use; then apply with brush, roller or airless sprayer. Always wear painters mask when spraying. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

     

    Spraying Instructions:

    • Reduce with up to 1/2 pint of water/gallon as needed.
    • Airless sprayers should use 17/1000 to 21/1000 tip
    • Reversible tips are best
    • Use only 30 mesh high pressure filters
    • For best coverage, spray 18" from surface
    • Overlap preceding coat with 1/4 to 1/2 the fan width
    Drying/Curing TimeFor best results wait a minimum of 4 hours before recoating. This product cures and bonds over a full 7 day period.
    Health PrecautionsAs with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation.
    CleanupClean tools and equipment while they are still wet with a warm soapy water solution. Any unused primer should be stored in air tight container for reuse. Or, add kitty litter to solidify in the can or roll out on a piece of cardboard and leave to dry before disposing. Do not flush excess primer down the sink or toilet.
    Physical DescriptionLow odor, mildly alkaline, white
    Solubility in WaterDilutable
    VOC Material9 g/l
    HAP’s (Hazardous Air Pollutants)Zero

    Documentation and Tear Sheets

    Interested in Deals and New Products?

    Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

    Skip to content